Plumbing (36)

These are Normal Gauge Hydrodare with a size of 1 1/2 inch / 37mm  They are black low density polyethylene service pipes for potable water and agricultural uses  The bar

These are Normal Gauge Hydrodare with a size of 1 1/4 inch / 31mm  They are black low density polyethylene service pipes for potable water and agricultural uses  The bar

These are black low density polyethylene service pipes for potable water and agricultural uses  The bar rating for this 1/2" Heavy Gauge Hydrodare is 9.0- 14.5  They are manufactured in

These are Normal Gauge Hydrodare with a size of 1 inch / 25mm  They are black low density polyethylene service pipes for potable water and agricultural uses  The bar rating

These are black low density polyethylene service pipes for potable water and agricultural uses  These are high quality heavy gauge hydrodare  They are manufactured in accordance to 15134/1977

These are 1/2" chrome plated high neck sink taps These taps will fit stylishy into any kitchen sink The length of these are 235mm

These are Normal Gauge Hydrodare with a size of 1/2 inch / 12mm  They are black low density polyethylene service pipes for potable water and agricultural uses  The bar rating

These are Normal Gauge Hydrodare with a size of 2 inch / 50mm  They are black low density polyethylene service pipes for potable water and agricultural uses  The bar rating

These 3/4" bath taps are a full turn operation  They are suitable for High & Low Pressure Systems  They are chrome plated

These are black low density polyethylene service pipes for potable water and agricultural uses  These are high quality heavy gauge hydrodare  They are manufactured in accordance to 15134/1977

These are Normal Gauge Hydrodare with a size of 3/4 inch / 18mm  They are black low density polyethylene service pipes for potable water and agricultural uses  The bar rating

300L Capacity Twin Coil Solar Model Comes c/w 3kW Immersion Twin Coil Not Suitable for Well water

 

APE Fitting Wallplate Shower Double Elbow 153mm X 1/2" Ape AP492 Plate With Two Elbows

Environmentally friendly - Neutralises potentially harmful acidic waste before it goes to drain. Maintains neutral environment in sewers and septic tanks Easy-fit Speedfit® fittings Visible protection - no overdose or

10 year Inhibitor The Corrosion Master CM10 is designed to continue working unattended for 10 years and is supplied with a installation date label. 10 Years maintenance free corrosion protection

5 year Inhibitor The Corrosion Master CM5 is designed to continue working unattended for 5 years and is supplied with a installation date label 5 Years maintenance free corrosion protection

Scalemaster® i-Test - Your 5 Minute Solution Works with all benchmark approved inhibitors. Print or Email your report to your customer directly

consists of 10 probes one sanding belt for use with i_Test

consists of 50 probes one sanding belt for use with i_Test

This Plumbers 'O' Ring Box complies with code BS5412  This pack includes: 15 X 018 'O' Ring, 15 X 019 'O' Ring, 15 X 115 'O' Ring, 5 X 212

This Plumbers' Ball Valve Repair Washer Box comes with a highly durable 12 compartment box  This plumbers' repair kit includes; 10 X 1/2" Ballvalve Rubber Washers, 5 X 7/8" Ballvalve

This Plumber's Repair Kit Box for Tap Washers comes with a durable case with 12 compartments for easy storage and sorting This kit includes: 3/8" Flat Tap Rubber Washers X

This Plumber's Repair Kit Box With Fibre & Rubber Washers comes with a durable case with 12 compartments for easy storage and sorting 1/2" Ballvalve Seat Fibre Washers X 10,

This is an underground socket plug or stop end for 4" sewers  It is suitable for high temperature waste discharges  It is made from high quality uPVC

SM1 - Corrosion Inhibitor - Prevents corrosion, hard water limescale precipitation and is essential for protecting hot water heating systems and maintaining operational efficiency 500ml Bottle Minimum dosage is 500ml

SM2 Non-Acid De-Scaler - FOR ESTABLISHED CENTRAL HEATING SYSTEMS. Restores and maintains heat exchanger efficiency in hard water areas and stops boiler noise 500ml Bottle This treats up to a

SM3 - System Cleaner - FOR COMMISSIONING NEW CENTRAL HEATING SYSTEMS 500ml Bottle Removes installation foulants, flux, grease and debris suspended in water by flushing. Should be left in system

SM4 Sludge Remover - FOR THE REGENERATION OF ESTABLISHED HEATING SYSTEMS 500ml Bottle Removes (black) iron oxide corrosion products by flushing and restores circulation and system performance. Should be left

SM5 - Internal Leak Sealer - FOR THE INTERNAL SEALING OF INACCESSIBLE LEAKS & WEEPING JOINTS 500ml Bottle Forms a soft seal within 24 hours. Will not cause blockages in

SM6 Heat Optimiser - IMPROVES HEAT TRANSFER. SAVES UP TO 15% ON HEATING COSTS 500ml Bottle Bottle contains 500ml which will provide effective treatment for a 100 litre (10 rad)

SM7 System Biocide - PREVENTS BACTERIAL GROWTH IN LOW TEMPERATURE SYSTEMS 500ml Bottle Prevents bacterial and fungal growth. Suitable for under-floor and heat-pump systems.

SM8 - Power Cleaner - HEAVY DUTY CLEANER FOR POWERED FLUSHING OF SLUDGED SYSTEMS 500ml Bottle For the regeneration of sludged heating systems using powered flushing equipment. Assists in the

Steel threaded blanking plugs with sealing ring available in various size G thread fittings It is manufactured from steel

Removing iron, nickel and cobalt particles in the water Saving energy by up to 6% per annum Providing consistent protection for the boiler Reducing carbon emission 28mm Nuts & Rings

Removing iron, nickel and cobalt particles in the water Saving energy by up to 6% per annum Providing consistent protection for the boiler Reducing carbon emission Saving maintenance cost