Plumbing 2 (16)

Removing iron, nickel and cobalt particles in the water Saving energy by up to 6% per annum Providing consistent protection for the boiler Reducing carbon emission 28mm Nuts & Rings

Removing iron, nickel and cobalt particles in the water Saving energy by up to 6% per annum Providing consistent protection for the boiler Reducing carbon emission Saving maintenance cost

consists of 50 probes one sanding belt for use with i_Test

consists of 10 probes one sanding belt for use with i_Test

Scalemaster® i-Test - Your 5 Minute Solution Works with all benchmark approved inhibitors. Print or Email your report to your customer directly

10 year Inhibitor The Corrosion Master CM10 is designed to continue working unattended for 10 years and is supplied with a installation date label. 10 Years maintenance free corrosion protection

5 year Inhibitor The Corrosion Master CM5 is designed to continue working unattended for 5 years and is supplied with a installation date label 5 Years maintenance free corrosion protection

Environmentally friendly - Neutralises potentially harmful acidic waste before it goes to drain. Maintains neutral environment in sewers and septic tanks Easy-fit Speedfit® fittings Visible protection - no overdose or

SM8 - Power Cleaner - HEAVY DUTY CLEANER FOR POWERED FLUSHING OF SLUDGED SYSTEMS 500ml Bottle For the regeneration of sludged heating systems using powered flushing equipment. Assists in the

SM7 System Biocide - PREVENTS BACTERIAL GROWTH IN LOW TEMPERATURE SYSTEMS 500ml Bottle Prevents bacterial and fungal growth. Suitable for under-floor and heat-pump systems.

SM6 Heat Optimiser - IMPROVES HEAT TRANSFER. SAVES UP TO 15% ON HEATING COSTS 500ml Bottle Bottle contains 500ml which will provide effective treatment for a 100 litre (10 rad)

SM5 - Internal Leak Sealer - FOR THE INTERNAL SEALING OF INACCESSIBLE LEAKS & WEEPING JOINTS 500ml Bottle Forms a soft seal within 24 hours. Will not cause blockages in

SM4 Sludge Remover - FOR THE REGENERATION OF ESTABLISHED HEATING SYSTEMS 500ml Bottle Removes (black) iron oxide corrosion products by flushing and restores circulation and system performance. Should be left

SM3 - System Cleaner - FOR COMMISSIONING NEW CENTRAL HEATING SYSTEMS 500ml Bottle Removes installation foulants, flux, grease and debris suspended in water by flushing. Should be left in system

SM2 Non-Acid De-Scaler - FOR ESTABLISHED CENTRAL HEATING SYSTEMS. Restores and maintains heat exchanger efficiency in hard water areas and stops boiler noise 500ml Bottle This treats up to a

SM1 - Corrosion Inhibitor - Prevents corrosion, hard water limescale precipitation and is essential for protecting hot water heating systems and maintaining operational efficiency 500ml Bottle Minimum dosage is 500ml